2) Loosen the bolts only when fitting the shafts. DO NOT eliminate the bolts entirely. If taken out they may fall into the housing and lead to a failure. The 552533.png]#box must be disassembled to retrieve the bolts if this transpires.
1) Tighten bolts to keep away from oil leaking throughout operation. (The bolts have a seal beneath their heads.)
Get care when tightening the 4 x locking bolts inside the housing. These bolts resolve the detachable splined shafts in place.
Be aware: When fitting splined shafts.
Simply click on drawing to enlarge.
one:one.eighty five velocity increaser with 13/four”Z20 splined output shaft.
pto gearbox is a pattern that is slowly increasing.