We EPG group one of the Biggest Chain and sprocket manufacturer in China. We provide you most type of industry chains, agricultural chains, conveyor chains and related sprockets etc……..
Contact us: Wechat/whatsapp/mobile: +86-13083988828
The With over 30 years of combined experience in Bearings and Power Transmission, EPG is fully capable of designing and producing products to fit your specific application. Our experienced staff of engineers and customer service representatives look forward to providing you with anyWith many years’ experience in these lines, we have been distinguished from other suppliers in China by our advantages in competitive pricing, on-time delivery, prompt responses, on-hand engineering support and good after-sales services. EPT chain & sprockets, both standard and non-standard, are made of: ○ High quality steels: dimensions and adapted chemical composition for the different chain & sprocket parts ○ The most efficient manufacturing processes: • Special technique for the production of bushes improving the chain & sprocket wear resistance ( EPT know-how) • Plates produced by multi-stage processing tools ensuring a regular pitch ( EPT technology) ○ Adequate mechanical and heat treatments of chain & sprocket parts: • Shot peening • Surface finishing • replacement of Case hardening, carbonitriding, quenching, tempering … • EPT®treatment • Freezing treatment • Corrosion protection coatings (GEOMET, zinc, nickel plating, …)Rosta 06510007 100BB13 idler sprocket for SE45/SE5010si1rs is manufactured to ANSI and ISO standards and is made from high-quality steel. It has 13 teeth and runs #100 roller chain & sprocket for size SE 45/SE 5010si1rs. For more information or to get a quote please contact us and we will be happy to assist you!
06510007 100BB13 Sprocket Dimensions
- Sprocket Size: 100BB13
- Article Number: 06510007
- Tooth Count: 13
- Works With Chain & Sprocket Size: 100-1
- Dimension (W): M20
- Dimension (L): 100mm
- Torque Hex Nut 0.5 d (Nm): 165
- Works With Tensi1r Type: SE-45 / SE-50
- Adjustable Range (R) with SE: 40-80 / 48-80
- W8: 2.00 kG
Mounting Instructions for Chain & Sprocket Drives
Standard Positioning: The ROSTA10sioning device should be placed on the slack side of the chain & sprocket drive, close by the smaller sprocket wheel in order to enlarge its contact-arc, therefore contact application from the outer side of drive. In mounted position, the10si1r-arm should stay close to parallel to the chain & sprocket run, in drain direction. By extremely long chain & sprocket drives it is recommendable to install several10si1rs or the type “Boomerang®” in order to enlarge the slack compensation. Reversible Chain & Sprocket Drive:By reversible chain & sprocket transmissions, it is recommendable to install a10si1r on each side of the chain & sprocket-strands. Due to the alternate occurring of the slack, both10si1rs should only be pre-tensi1d up to max. 20°, in order to retain a reset-path of 10°, when strains are changing from slack span on working span in reversible applications. Sprocket Teeth in Mesh:By the initial10sioning of the chain & sprocket, at least 3 teeth of the10si1r sprocket wheel should be in mesh with the rollers. The min. distance between the sprocket wheel of the10si1r to the next sprocket wheel in the chain & sprocket drive should be at least 4 chain & sprocket-pitches.Adjustment of Chain & Sprocket Track:The wheel of the sprocket wheelset is adjustable according to the position of the chain & sprocket drive track. The wheel is positi1d between 2 nuts on the threaded shaft. In changing the adjustment band “R”, the track of the10si1r wheel can be set according to the relevant strand course. After positioning the sprocket, re-tighten the 2 nuts on the side. The counter-nut “B” remains always tightened.