This collar has a quick-clamping design to make frequent adjustments by using a lever handle rather than tools. It is suitable for applications that want quick alterations and method tuning such as for example adjusting guidebook rails or locating ingredients. It is made of aluminium with an anodized surface finish that increases the metal’s don and corrosion tolerant properties and boosts its surface hardness, holding electricity, and visual aspect. This collar posseses an aluminum lever handle with a precious metal anodized finish for quick installation and relieve of the collar. The operating temperatures for this collar range from -40 to 93 degrees C (-40 to 200 degrees F). This shaft collar is ideal for use in a variety of applications, which include in the automobile industry to situate components in automobile electrical power steering assemblies, the developing industry to locate elements on a conveyor belt system, and the hobby craft industry to hold tires on axles in remote control vehicles, among others.
Shaft collars will be ring-shaped devices generally used to secure elements onto shafts. They also provide as locators, mechanical stops, and spacers between different components. The two simple types of shaft collars will be clamping (or split) collars, which come in one- or two-piece styles, and setscrew collars. In both types, a number of screws hold the collars in place on the shaft. In setscrew collars, screws happen to be tightened through the collar until they press directly against the shaft, and in clamping collars, screws happen to be tightened to uniformly compress the collar around the shaft without impinging or marring it. Setscrew collars and one-piece clamping collars should be mounted by sliding the collar over the finish of the shaft, while two-piece clamping collars distinct into two halves and may be installed between pieces on the shaft. Shaft collars are produced from a variety of materials including zinc-plated metal, aluminum, nylon, and neoprene. Found in nearly every type of machinery and industry, shaft collars are being used in applications which include gearbox assemblies, motor bases, machine tools, drive shafts, agricultural implements, medical gear, and paper and metal mill equipment, among others.
EPT manufactures shaft collars, rigid couplings, and zero-backlash motion control couplings including beam couplings, bellows couplings, Oldham couplings, curved jaw couplings, and miniature disc couplings. The company, founded in 1937, and headquartered in Marlborough, MA, complies with Restriction of Hazardous Chemicals (RoHS) and Registration, Evaluation, Authorization, and Restriction of Chemical substances (REACH) standards.
One-part clamping shaft collar for applications requiring a more uniform holding electric power and bigger axial load potential than setscrew collars
Quick-clamping collar design for making frequent adjustments without tools
Aluminum with a great anodized complete for greater corrosion resistance, wear resistance, and surface area hardness than plain aluminum
Includes an aluminum lever handle with a precious metal anodized finish for quick installation and discharge of the collar
Operating temperatures range from -40 to 93 degrees C (-40 to 200 degrees F)
Shaft collars are commonly used as courses, spacers, mechanical stops, and for component alignment upon a shaft. They will be one of the most typical power transmission Clamping Shaft Collars factors and so are found on gear in most industries.