Coupling Grease

Why Coupling Grease?
Adequate lubrication is important for satisfactory gear coupling operation. Gear Coupling Grease is exclusively designed for gear coupling applications to increase coupling existence though dramatically lowering servicing time. Its higher viscosity base oil and tackifier combine to maintain the grease in spot and reduce separation and it truly is in comprehensive compliance with NSI/AGMA 9001-B97 lubrication recommendations.
Coupling Grease is dark brown in shade and produced that has a lithium soap/polymer thickener, which has superior resistance to oil separation when subjected to high centrifugal forces normally located in couplings. Bearing or standard objective greases have a tendency to separate and shed effectiveness as a result of substantial centrifugal forces on the different ingredients at higher rotational speeds. These substantial centrifugal forces encountered in couplings separate the base oil from your thickeners. Heavy thickeners, which have no lubrication characteristics, accumulate during the gear tooth mesh region resulting in premature coupling failure. Gear Coupling Grease is made to very resistant to centrifugal separation of the oil and thickener, which enables the lubricant to be utilized for a somewhat prolonged time period of time.
One of several techniques to your success of Gear Coupling Grease will be the variable consistency throughout the working cycle on the application. The consistency of our gear coupling grease improvements with all the operating conditions. Working on the lubricant under actual services situations causes the grease to turn out to be semi-fluid, functionally solash lubricating the dress in surfaces with the coupling. As the grease cools, it returns for the unique consistency, thereby stopping leakage.
Gear Coupling Grease is available from stock in 14 oz. cartridges, one lb. and 5 lb. cans.
Characteristics
Minimizing of coupling wear
Resistance to water washing
Corrosion and rust protection
High load carrying capabilities
Extended relubrication frequency
Use at temperatures up to 325° F
Staying in spot below higher speeds
Resistance to centrifugal separation
Reduction in down time & upkeep cost
Gear Coupling Grease has a consistency which overlaps the NLGI grades 0 and one. This grease is specially formulated that has a lithium/polymer thickener and fortified with corrosion, oxidation, extreme pressure, and a effective rust inhibitor additive package.