DC MOTOR PUMP GROUP one
Common Description
Consisting of the heavy duty DC motor as well as the CB1S gear pump, this pump motor group is surely an ideal hydraulic power unit for mobile hydraulic equipments, such as motor vehicle carriers, mobile aerial lifts, and backup systems.
DC MOTOR PUMP GROUP two
Basic Description
This motor pump consists of 4.5″ DC motor, a CBSR gear pump with built-in relief valve and check out valve.
DC MOTOR PUMP GROUP 3
Basic Description
This motor pump consists of a four.5″ DC motor in addition to a CBSR gear pump that has a normal power up/gravity down circuit with a relief valve, a verify valve and a solenoid release valve.
Specific Notes
1. This energy unit is of S3 duty cycle, i.e., non-continuous operation, thirty seconds on and 270 seconds off.
2. Clean every one of the hydraulic elements concerned prior to mounting the energy unit.
3. Viscosity on the hydraulic oil shoud be 15~68 cst, which should also be clean and no cost of impurities. N46 hydraulic oil is advisable.
four. The power unit needs to be mounted horizontally.
five. The relief valve strain is preset about 25% larger than the operating pressure.
6. Flow control valve for lowing velocity adjustment is available unpon request.
DC MOTOR PUMP GROUP
Tags: