Deep groove ball bearings are the hottest bearing type. Therefore, they are available from LYHY in lots of designs, variants, Deep Groove Ball Bearing china series and sizes. Deep groove ball bearings happen to be versatile, self-retaining bearings with stable outer rings, inner rings and ball and cage assemblies. These kind of bearings happen to be of simple design, durable in procedure and easy to maintain; They can be purchased in single and dual row patterns and in open and sealed variants.
In a deep-groove ball bearing, the race dimensions are close to the dimensions of the balls that run in it. Deep-groove ball bearings can support larger loads. As a result of development technology used, open up bearings can continue to have switched recesses on the outer ring for seals or shields. Because of their low frictional torque, they will be suitable for high speeds.
Packing:
1. Bearing surface is covered with the anti-rust oil first; After that wrapped with the plastic material film;
2. Then loaded the roller bearings with draft papered specialist belts;
3. Finally, packing the bearings with wooden box totally at the 
outer packing to invoid the rust or the moist;
4. We can also packing the bearings in accordance to customers’ special requirement;
Feather
Top quality steel: Ultra clean steel to extend bearing life by up to 80%
Advanced grease technology: LYHY lubricants that can extend grease life and performance.
High Grade Balls: Quiet and smooth operation even at high speed
Super done raceways: Specially honed to reduce noise and increases lubricant distribution and lifestyle.
Paten seals: Provide resistance to contamination in the toughest environments
Quality Assured: 100% examining ensures total product quality
Our deep groove ball bearings deliver reputable performance in a variety of applications and conditions. With super-finished raceways and controlled geometries, our premium design helps ensure consistent quality. Our portfolio comes with typical, thin section, narrow, vast and miniature and extra-little deep groove ball bearings that span 3 mm to 400 mm bore sizes. The extended product line includes a complete offering of open, shields, seals and snap ring combinations.
Its chrome steel structure helps it be durable and resistant to deformity under heavy loads. The rubber seals on both sides of the bearing maintain lubricant in and contaminants out. This single-row sealed ball bearing is for work with in applications that involve merged radial and axial loads and a dependence on high running accuracy at huge rotational speeds. Such applications involve clutches, drives, gearboxes, compressors, pumps, turbines, and printing and textile equipment, among others.