Double pitch chain

Usually, conveyor chains are operated for longer distances and at lower speeds than transmission chains. Accordingly, despite the fact that the pins, bushings and rollers are left unchanged, as well as plate pitch is doubled to cut back the number of sprocket teeth engaged using the chain to half, the put on of pins, bushings and rollers is tiny since the chain speed is minimal. Double Pitch Chains, conform to ANSI common and “Ultimate Daily life Chain Series” and “Environment Resistant Chain Series”, as are single pitch chains can also be out there.
Double pitch chain with resin rollers
It is a Double Pitch Chain with R Roller manufactured from resin, which generates less noise and lighter excess weight compared with steel rollers. So, the chain is ideal for a conveyor technique developed to operate quietly and convey light-weight content articles. Since the elements besides rollers are made of steel, the average tensile strength of the resin roller chain would be the very same as that of the steel roller chain. On the other hand, the “maximum allowable load” in the chain ought to be kept decrease, as proven within the following table, to stop harm on the plastic rollers from the strain from your engagement with sprockets.
The “Allowable load of resin rollers” refers to the allowable load acting when conveyed articles or blog posts press the resin rollers traveling to the floor surface this kind of as guid rails.
Significant roller (R) and smaller rollers (S)
Considering that double pitch chains are commonly used for conveying merchandise on the horizontal floor, chains created for this purpose have enhanced roller diameter equal to that of single pitch chains Double%20pitch%20chain1of the exact same pitch for enhanced load capacity and reduced traveling resistance. These rollers with bigger outer diameter are referred to as “large rollers”, as well as common rollers are named “small rollers”.
Within this catalog, significant rollers are expressed as R Roller, and compact rollers as S Roller.
Designation of double pitch chains
A double pitch chain is designated, as within the following illustration, based on the nominal quantity of the single pitch chain it’s depending on.
Connecting hyperlinks
For that connecting links of double pitch chains of all sizes, the connecting plates and connecting pins are clearance-fitted. For C2060H or smaller, the spring clip sort (R connecting hyperlink) is normal. For C2080H or larger, the cotter sort (C connecting website link) is standard. Connecting hyperlinks with an attachment, best roller or side roller are also readily available.



As one of the leading manufacturers, suppliers, and exporters of mechanical products, We offer reducers, sprockets, industrial and conveyor chains, belts, pulleys, gears, racks, gearboxes, motors, PTO Shafts, taper lock Bushing, and many other products. Please get in touch with us for details.

SSJ UK Limited
Sara Jones
Mail: [email protected]
TEL: + 44 7944 869861
ADDR.: Bury St Edmunds, Suffolk IP32 7LX, UK

TEL: +39 0522 1606 388; +39 3471 65 17 22
ADDR.:Via Pasteur, Reggio Emilia, Italy