Fan Electric motor, 1/8 hp 120V 2.2 Amp 3-Speed
General Description: New fan motor, taken off unused 18” or 24” China Surroundings Compressor diameter TPI fans. Made to run an 18” or 24” enthusiast blade (blade NOT included).
This motor includes a (detached) cord with grounded plug, motor capacitor and a 3-speed control switch. All of the wiring between your electric electric motor, capacitor and quickness control switch is still installed however the cord itself is generally detached as seen in the photos. (Discover “Control Notice” below for alter type.)
T (See “Program Notice” below for utilize in a variety of other applications.)
Sizes: The engine body is 5” diameter and 3 ½” long (excluding the shaft). The engine shaft is electric fan motor china usually½” (0.500″) diameter x 2 ½” long with a collection screw smooth. There are (4) threaded mounting lugs on the front of the motor, ½” lengthy x .16 dia. with washers and nuts. The studs may actually have got 4mm threads and to be on a 117mm (4.6”)diameter circle (3 ¼” measured in one stud to another).
Rate: The approximate motor speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. Direction of rotation (facing the shaft end of the electric powered motor) is Clockwise.
Control Take note: Motors may come with EITHER a 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we have demonstrated BOTH variations in the images). These two types of switches both control the engine in the same way (but you have a rotating knob and you have a pull-chain). In the event that you order several electric motor at the same time, we will do our better to supply your purchase with each one sort of control or the additional.
Application Note: Do NOT use this electric electric motor in a nonfan software. This is a completely enclosed fan electric engine and made to have continuous ventilation over the electric motor casing for cooling. The housing isn’t vented and the electric powered electric motor will overheat and get into automatic thermal overload if operate in a nonfan program where there isn’t solid ventilation past the engine. (Caution Note: the electric motor will restart instantly when it cools cool off.) Using this electric motor for applications apart from 18 & 24″ TPI fans could also overload the engine and lead it to proceed into automatic thermal overload. (Your companion blade from another manufacturer may have a steeper blade angle.)
Origin: This electric electric motor is manufactured in China.