Fan Electric motor, 1/8 hp 120V 2.2 Amp 3-Speed
General Explanation: New fan motor, removed from unused 18” or 24” China Atmosphere Compressor diameter TPI fans. Made to operate an 18” or 24” enthusiast blade (blade NOT included).
electric fan motor201909101714478813283This motor has a (detached) cord with grounded plug, motor capacitor and a 3-speed control switch. All of the wiring between your electric engine, capacitor and quickness control change is still hooked up nevertheless the cord itself is normally detached as seen in the photos. (Find “Control Notice” below for change type.)
T (See “App Notice” below for utilize in a variety of other applications.)
Sizes: The engine body is 5” diameter and 3 ½” long (excluding the shaft). The engine shaft can be½” (0.500″) diameter x 2 ½” long with a collection screw soft. There are (4) threaded mounting lugs on the front of the motor, ½” long x .16 dia. with washers and nuts. The studs appear to have got 4mm threads and to become on a 117mm (4.6”)diameter circle (3 ¼” measured from one stud to the next).
Rate: The approximate motor speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. Direction of rotation (facing the shaft end of the electrical motor) is Clockwise.

Control Take Electric Fan Motor Notice: Motors may come with The 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we’ve demonstrated BOTH versions in the images). These two types of switches both control the engine in the same way (but you possess a rotating knob and you have got a pull-chain). In the event that you order several electric motor at the same time, we can do our best to supply your purchase with each one kind of control or the additional.
Application Note: Do NOT use this electric electric motor in a nonfan app. This is a completely enclosed fan electric electric motor and made to have constant ventilation over the motor casing for cooling. The housing isn’t vented and the electrical electric motor will overheat and get into automated thermal overload if operate in a nonfan program where there isn’t strong ventilation past the engine. (Caution Note: the electrical motor will restart immediately when it cools back off.) Using this electrical motor for applications apart from 18 & 24″ TPI fans could also overload the electric motor and cause it to proceed into automated thermal overload. (Your companion blade from another producer may possess a steeper blade position.)
Origin: This electric electric motor is produced in China.