FMM Form Mill Couplings
The FMM Form coupling consists of a single conventional flex hub, one universal straight bored hub as conventional, two sleeves and 1 accessory kit. This coupling is supplied with exposed bolts as normal. Shrouded bolts are available upon request through size 5.five.
Attributes
For long existence
Normal 20° stress angle
Heat treated bolts for better strength
Corrosion resistant bolts and nuts for ease of servicing
Presents parallel, angular misalignment and end float
Flex Half coupling interchangeable with business specifications
Lengthy 
Universal Hub supplied to client specs with straight or tapered bores
Ordering Details
Application: Driver and Driven.
Sort and size of coupling, horizontal, vertical etc.
Electrical power: Motor horspower or torque necessity.
Speed: Motor RPM or Driven RPM.
Distance amongst shaft ends (BSE).
Shaft sizes.
Taper per foot and length of taper if tapered bore is required.
Specify counterbore dimensions if wanted.
Submit a drawing if available.
FHDFS Sort Floating Shaft Couplings
The FHDFS Form coupling consists of two flex-rigid couplings and 1 floating shaft. The coupling is supplied with all the rigid hubs outboard unless of course otherwise specified. The coupling comes with exposed bolts only.
Capabilities
Flex Hubs for prolonged life
Conventional 20° pressure angle
Heat handled bolts for higher power
Corrosion resistant bolts and nuts for ease of servicing
Accommodates parallel and angular misalignment
Removal of center assembly makes it possible for forease of maintenance devoid of repositioning machinery
Rigid hubs outboard allows for greater shaft diameters
Built for high-torque low-speed applications that happen in mill operations
Ordering Details
Application: Driver and Driven.
Kind and dimension of coupling, horizontal, vertical and so forth.
Electrical power: Motor horspower or torque necessity.
Velocity: Motor RPM or Driven RPM.
Distance among shaft ends (BSE).
Connecting gear shaft sizes.
Specify which hubs are to become used about the gear (Rigid or Flex).
Rigid hubs is going to be applied to the tools unless otherwise specified.
Length of floating shaft may possibly affect max angular misalignment.