Flexible plastic equipment racks in 0.8 Mod (32DP) pitch. These racks can provide an easy to install rotational drive of up to approx 270 degrees for example on camera focus bands. They also provide an economical solution where a large gear is required or an extended stretch (up to 2 metres) of linear movement is preferred. These racks are compatible with our 0.8 Mod and 32 DP pitch Spur Gears.
EVER-POWER share racks are created for high precision linear movement applications. We offer a large selection of racks which range from module 0.5 to 10 and lengths from 100 to 2000 mm.
Hardened Floor Racks (MRGF – MRGFD) : Gets the highest power and precision in the EVER-POWER standard rack series. Bolt holes could be remachined as carburizing is certainly applied only within the tooth region. J Series items are also available.
Hardened Ground Racks (KRGF-H – KRGFD-H) : Heat treated surface gears with high precision and strength has excellent cost-efficiency ratio. J Series items are also available.
Hardened Racks (KRF-H/KRFD-H) : This is a strong rack manufactured from Chromoly steel, treated by carburizing. Has high-strength, high wear resistance, and allows downsizing of SR racks. J Series items are also available.
Hardened Racks (SRF-H/SRFD-H) : Stable Hardened racks with high power, long life span are affordable. J Series products are also available.
Thermal Refined Ground Racks (KRG – KRGF – KRGD) : High strength and abrasion-resistant for precision linear motion.
Steel Racks w/ Machined Ends (SRAF – SRAFD – SRAFK) : This gear rack has the same tooth height and face width sizes, more compact and reasonably priced in comparison to SRF Racks
Steel Racks (SR) : Low priced, large choices of modules and number of tooth. J Series products are also available.
Metal Racks w/ Machined Ends (SRF) : Low cost, large choices of modules and quantity of tooth. J Series products are also available.
Racks with Bolt Holes (SRFD – SRFK) : Low cost, large choices of modules and amount of tooth. J Series products are also available.
Stainless Steel Racks (SUR•SURF•SURFD) : Suitable for food machinery due to SUS304 material\’s rust-resistant quality.
Plastic-type material Racks (DRF/DRFD/DRFK) : Plastic racks with little dimensional change, absorb lesser water than MC Nylon racks. J Series products are also available.
Plastic Racks (PR•PRF) : Produced form MC nylon, can be used without lubrication.
Brass Racks (BSR) : Small pitch racks made of free-reducing brass, excellent workability and high rust resistance.
Steel Round Racks (SRO – SROS) : Convenient in applications where the rack gets the reciprocal movement. S Type is easy to install.
Stainless Steel Round Racks (SURO) : Same dimensions as SRO racks, except in stainless steel. Use where rust-resistance is required.
Ground Helical Racks (KRHG – KRHGF – KRHGFD) : Excellent items with high precision and strength, and low noise and abrasion characteristics.
Metal Helical Racks (SRH – SRHF – SRHFD) : Effective in reducing noise and vibration because of larger contact ratio of helical gears.
Molded Versatile Racks (DR) : Found in applications due to its flexibility, where steel racks do no have this attribute. Pinions and components are also available.
Molded Flexible Rack Clamps (SRS) : Used to secure Molded Flexible Racks.
Molded Flexible Rack Pinions (SSDR) : Spur pinions used for molded flexible racks.
Flexible Rack Guideline Rails (ARL) : Information Rails for Molder Flexible Racks.
You can expect as standard a wide selection of Racks in Metric and Imperial sizes. Spur Racks can be found in Steel (En8) or more to 2 metres in length. Stainless Steel and Delrin (Plastic-type) Racks are created with Spur and Helical tooth forms, square and circular sections up to 400mm in length. Alternative materials can be found on ask for. Moulded Hostaform Racks can be found to offer an economical alternative where much less torque is required.
Variable stiffness can enhance the capability of human-robot interacting. Predicated on the system of a flexible rack and gear, a rotational joint actuator named vsaFGR is definitely proposed to regulate the joint stiffness. The flexible gear rack can be regarded as a mixture of a non-linear elastic element and a linear adjusting mechanism, providing benefits of compactness. The joint stiffness is definitely in the range of 217-3527 N.m/rad, in fact it is inversely proportional to the 4th-order of the apparatus displacement, and almost independent from the joint angular deflection, providing advantages of quick stiffness regulation in a short displacement of 20 mm. The apparatus displacement with regards to the flexible gear rack can be perpendicular to the joint loading drive, so the power required for stiffness regulating is as low as 14.4 W, providing benefits of energy conservation. The high compactness, great stiffness range and low power price of vsaFGR are proved by simulations and experiments.
Flexible plastic equipment racks in 0.8 Mod (32DP) pitch. These racks can provide an easy to install rotational drive of up to approx 270 degrees for example on camera focus rings. They also provide an economical option where a huge gear is required or a longer stretch (up to 2 metres) of linear movement is preferred. These racks are compatible with our 0.8 Mod and 32 DP pitch Spur Gears.
EVER-POWER stock racks are created for high precision linear motion applications. We offer a large selection of racks ranging from module 0.5 to 10 and lengths from 100 to 2000 mm.
Hardened Floor Racks (MRGF – MRGFD) : Gets the highest strength and precision in the EVER-POWER standard rack series. Bolt holes can be remachined as carburizing is usually applied just within the tooth area. J Series items are also available.
Hardened Surface Racks (KRGF-H – KRGFD-H) : Warmth treated ground gears with high precision and power has excellent cost-efficiency ratio. J Series items are also available.
Hardened Racks (KRF-H/KRFD-H) : That is a solid rack manufactured from Chromoly steel, treated simply by carburizing. Has high-strength, high wear level of resistance, and enables downsizing of SR racks. J Series products are also available.
Hardened Racks (SRF-H/SRFD-H) : Stable Hardened racks with high power, extended life span are affordable. J Series items are also available.
Thermal Refined Ground Racks (KRG – KRGF – KRGD) : High strength and abrasion-resistant for precision linear motion.
Steel Racks w/ Machined Ends (SRAF – SRAFD – SRAFK) : This gear rack has the same tooth height and encounter width sizes, smaller sized and reasonably priced compared to SRF Racks
Steel Racks (SR) : Low cost, large choices of modules and amount of the teeth. J Series products are also available.
Metal Racks w/ Machined Ends (SRF) : Low priced, large choices of modules and number of the teeth. J Series products are also available.
Racks with Bolt Holes (SRFD – SRFK) : Low cost, large choices of modules and quantity of the teeth. J Series products are also available.
STAINLESS Racks (SUR•SURF•SURFD) : Suitable for food machinery because of SUS304 materials\’s rust-resistant quality.
Plastic-type Racks (DRF/DRFD/DRFK) : Plastic racks with little dimensional change, absorb lower water than MC Nylon racks. J Series products are also available.
Plastic-type material Racks (PR•PRF) : Made form MC nylon, can be used without lubrication.
Brass Racks (BSR) : Small pitch racks made of free-slicing brass, excellent workability and high rust resistance.
Steel Circular Racks (SRO – SROS) : Convenient in applications where the rack has the reciprocal motion. S Type is simple to install.
Stainless Steel Circular Racks (SURO) : Same dimensions as SRO racks, except in stainless steel. Use where rust-resistance is necessary.
Ground Helical Racks (KRHG – KRHGF – KRHGFD) : Excellent products with high precision and strength, and low noise and abrasion characteristics.
Metal Helical Racks (SRH – SRHF – SRHFD) : Effective in reducing noise and vibration due to larger contact ratio of helical gears.
Molded Flexible Racks (DR) : Used in applications because of its flexibility, where steel racks do no possess this attribute. Pinions and add-ons are also available.
Molded Versatile Rack Clamps (SRS) : Utilized to secure Molded Versatile Racks.
Molded Flexible Rack Pinions (SSDR) : Spur pinions used for molded versatile racks.
Flexible Rack Guidebook Rails (ARL) : Information flexible gear rack201910211437227099171Rails for Molder Versatile Racks.
We offer as standard a wide selection of Racks in Metric and Imperial sizes. Spur Racks can be found in Steel (En8) and up to 2 metres long. STAINLESS and Delrin (Plastic material) Racks are produced with Spur and Helical tooth forms, square and circular sections up to 400mm in length. Alternative materials can be found on ask for. Moulded Hostaform Racks are available to offer an economical alternative where much less torque is required.
Variable stiffness can improve the capability of human-robot interacting. Based on the system of a versatile rack and gear, a rotational joint actuator called vsaFGR is proposed to modify the joint stiffness. The flexible gear rack can be regarded as a combination of a non-linear elastic element and a linear adjusting mechanism, providing benefits of compactness. The joint stiffness is definitely in the number of 217-3527 N.m/rad, and it is inversely proportional to the 4th-order of the gear displacement, and almost independent from the joint angular deflection, providing benefits of quick stiffness regulation in a brief displacement of 20 mm. The gear displacement with regards to the flexible gear rack is usually perpendicular to the joint loading power, so the power necessary for stiffness regulating is really as low as 14.4 W, providing benefits of energy saving. The high compactness, great stiffness range and low power cost of vsaFGR are proved by simulations and experiments.