The EP Greenhouse geared motor is a concise and lightweight reduction geared motor with an integrated limit switch system that is suitable for assembly of a locally available electric electric motor. The gear driver can be used in manually-managed or climate-controlled ventilation and display systems in greenhouses. The quick and easy-to-install EP gear reducer can be rainproof and windproof. The gear motor includes a high protection course (IP65) and can be utilized within an ambient temperature of 0-60 °C.
The low-noise gear driver for Greenhouse includes a gearwheel transmission and a worm wheel transmission, which are integrated in an aluminum precision housing. The self-braking worm wheel tranny ensures that the drive shaft is locked when the decrease gear driver is not running. The completely sealed reduction gear driver has an expansion chamber with a diaphragm to keep carefully the gear oil at a low pressure under all conditions, even at high temperatures. Thanks to the use of an expansion chamber, the gear driver can be installed in any placement. There are no restrictions, since there is no need for a bleed connect. The sealed reduction gear driver keeps the apparatus oil of the gear driver in optimal condition for its entire operating lifetime. The gear motor is suitable for discontinuous use, operating course s3-30%, with a maximum activation time of 25 minutes.
The Gear box reduction gear motor has an FT85 motor assembly flange, on to which the right IEC standard motor can certainly be installed (EN 50347).
The Gear box has a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off at the end positions. The limit switch system is installed in an built-in chamber and can be enclosed by an impact-resistant plastic material cover. The limit switch system is obtainable and easy to adjust. The limit change system’s maximum switching range can be 40 or 64 revolutions of the drive shaft. The cabling is linked in spring-clip connections. The geared motor has an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.
The gear driver for greenhouse includes 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates are available as accessories.
Optimum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in case of app of 4-pole electric motor.
Protection class IP65.
Can be used in ambient temperature ranges of 0-60°C.
Ideal for discontinuous use, operating class s3-30%, maximum activation time 25 minutes.
Equipped as regular with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installation of IEC standard motor (EN 50347).
Maximum switching selection of limit switch system 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).