Jaw Form Couplings

The Jaw Kind couplings are provided within the industry?¡¥s greatest assortment of stock bore/keyway combinations. These couplings require no lubrication and give really trusted service for light, medium, and heavy duty electrical motor and internal combustion power transmission applications.
Characteristics
Fail-safe ¡§C will even now execute if elastomer fails
No metal to metal make contact with
Resistant to oil, dirt, sand, moisture and grease
More than 850,000 combinations of bore sizes
Most sorts available from stock in 24 hours
Applications contain energy transmission to industrial equipment like pumps, gear boxes, compressors, blowers, mixers, and conveyors. Jaw Form couplings can be found in 24 sizes from a minimum torque rating of 3.five in¡§Clbs to a optimum torque rating of 170,004 in¡§Clbs plus a bore selection of .125 inches to seven inches.Our standard bore plan covers AGMA, SAE, and DIN bore/keyway and spline bore combinations.
The Jaw Type coupling is available in a selection of metal hub and insert supplies. Hubs are presented in sintered metal, aluminum, bronze, steel, stainless steel, and ductile iron.
L Kind
Coupling delivers common shaft-to-shaft connection for basic industrial duty applications
Typical L Type coupling hub components are both sintered iron or cast iron
LC Variety
Makes use of the regular L Type hubs by using a snap wrap spider and retaining ring
Suited for applications above 1,750 RPM
AL Sort
Aluminum hubs present light fat with lower overhung load and reduced inertia
Superb resistance to atmospheric circumstances, ideal for corrosive atmosphere applications
SS Type
The SS Kind coupling gives highest protection against harsh environmental situations
Sizes SS075-SS150 accessible from stock, other sizes accessible on request
RRS Kind
Center ?¡ãdrop out?¡À area of this coupling offers right shaft separation, when also permitting simple elastomer set up without having disturbing the hubs or requiring the realignment of shafts
Accommodates American and European business normal pump/motor shaft separations
The spacer is created of glass reinforced plastic, cast iron, or aluminum
SW Sort
Normal L Type coupling with a snap wrap elastomer with retaining ring
Properly suited for typical shaft to shaft connection in general industrial goal applications underneath one,750 RPM
C & H Types
Couplings supply common shaft-to-shaft connection for medium (C) and Heavy (H) duty variety applications
Regular C coupling hub is created of cast iron, although the H is constructed of ductile iron