Material Managing Power UNIT 2
Common Description
This energy unit functions electrical power up gravity down circuit. Activate the begin solenoid to begin the motor to lift the machine. The lowing movement is activated from the solenoid valve using the lowering velocity managed through the strain compensated movement handle valve. Items of this series might be widely used in the market of logistic products which include fork lift, mini lift table, and so forth.
Exclusive Notes
1. The duty of this energy unit is S3,i.e.,30 seconds on and 270 senconds off.
2. Clean every one of the hydraulic elements concerned before mounting the electrical power unit.
three. Viscosity of the hydraulic oil shoud be 15~46 cst,which ought to also be clean and cost-free of impurities, N46 hydraulic oil is proposed .
four. Oil modifying is needed right after the preliminary a hundred operation hrs,afterwards the moment each and every 3000 hrs.
5. The electrical power unit need to be mounted horizontally.

Materials Handling MATERIAL%20HANDLING%20POWER%20UNIT%202Power UNIT one
Standard Description
This energy unit is developed for the fork lift market, consisting of remarkably efficient gear pump, DC motor, manual raise and reduce valve, tank, ect. The up and down motion are managed by the lever from the guide release valve, that is equipped with an electrical switch to activate the motor. The lowing pace is managed by the pressure compensated flow control valve.
Exclusive Notes
one. The duty of this electrical power unit is S3, i.e. thirty seconds on and 270 senconds off.
two. Clean every one of the hydraulic components concerned before installation of the power unit.
three. Viscosity with the hydraulic oil shoud be 15~46 cst, which really should also be clean and free of charge of impurities, N46 hydraulic oil is recommended .
4. Oil modifying is required after the preliminary 100 operation hrs, afterwards as soon as every single 3000 hrs.
5. The energy unit proven is designed to be mounted horizontally.