What’s pin bush coupling?
Industrial Pin Bush Coupling
The function of a flexible coupling is to transmit torque from on shaft to another where limited mis alignment may occur and to absorb shock loads.
We are one of the prominent agencies engaged in providing Pinbush Coupling which has highly developed rubber compounds for use in bushes to absorb shock, tensional vibrations and small misalignments. These couplings will be flexible in type and tend to be of the cushioned travel type that can be used for transmitting the torque through the best tensile metal bolts to the device input. Moreover, they are simple and small in construction that makes these with the capacity of transmitting excessive torques at optimum speeds. These kinds of couplings generally permit travel in either way and require neither lubrication, nor adjustment after fitting.
Pin and Bush Couplings
lubrication-free
Features
Vertical/horizontal mounting
Adsorbs vibrations
Progressive torsion spring properties because of primarily pressurised bushings
Fail-safe in case of the inability of the bushings
Convenient replacement of bushings without disassembly of the coupling halves
Free of maintenance, no lubrication necessary
Declaration of conformity relative to ATEX 2014/34/EU possible
Typical applications
Pump drives
Belt drives
Ventilators
General mechanical engineering
Ever-power pin and bush coupling
Ever-power couplings contain a couple of resilient BARREL Shaped bushes with pins & nuts and two flanged hubs of graded cast iron.
The special BARREL shaped bushes permit the MISALIGNMENT IN ALL DIRECTIONS and present extra torsional flexibility as compared to plain bushes.
These couplings are ideal for standard engineering application requiring reliable power transmission even within conditions of shaft misalignments which are often unavoidable.
Description
Ever-power couplings are being used when flexible compensating couplings in every applications requiring a trusted tranny of torque under harsh operating circumstances. The conical chairs of the buffer pins facilitate mounting and guarantee maintenance-free procedure. The optimized shape of the barrelled buffers allows simple plug-in assembly and low circumferential backlash. A large number of type variants can be found, electronic. g. with brake disk, axial play limiting gadget, or brake motor couplings.
To the very best of the page
Examples of application
Ever-power couplings are being used generally mechanical engineering both as high-rate couplings and for huge torques, e. g. in
Cranes
Conveyors
Blowers
Screw pumps
Cableways
Mixers
Cement processing machines7
To the top of the page
Advantages of the product
Flexible fail-secure pin and bush coupling for moderate up to high torques
Compact design; low weights and mass occasions of inertia
Independent of route of rotation (ideal for reversing operation)
Suitable for plug-in assembly (blind assembly, bell housing installation)
Torque selection of the typical series between 200 Nm and 1,300,000 Nm
May be used in potentially explosive atmospheres; certified acc. to 94/9/EC (ATEX 95)
Pin & Bush Couplings
Simple and practically indestructible, the pin and bush design and style is well suited for applications that involve safeness, such as for example elevator drives or perhaps fire pumps. The fail-safe facet of the design allows the coupling to always be serviced at easy intervals, should the elastomer become damaged.
The elastomer elements reduce vibration and dampen impact loads, together with accommodate misalignment up to 0.5 degrees. The original bushing is a neoprene elastomer with a graphite impregnated bronze sleeve. They are still available, as well as a contemporary version of this concept: urethane bushings.
Ever-power also manufactures many customized variations of the coupling including brake drum and shear pin type couplings.
Damping shaft coupling that can be utilized universally to compensate for shaft misalignment
Nominal torque range from TKN = 19 Nm up to 62,000 Nm with 23 sizes
Temperature range: from -50 °C to +100 °C
Robust and verified a million 
times
Because of their torsional versatility, Ever-power couplings can approach critical torsional vibrations from the operating place of mechanical equipment in such a way that no negative effects on the travel train should be expected. Ever-electrical power couplings are made of high-top quality cast iron. The flexible elements made of synthetic rubber (Buna-N) can be found in different examples of hardness for most applications. Steel pins and flexible elements are designed to ensure that no have on occurs if they are properly fitted.
Your benefits instantly
Fail-safe for optimum operational reliability
Three-part type ideal for plug-in assembly and simplified replacement unit of elements
Choice of elastomer hardness to suit various applications
Ideal for use in potentially explosive environments; certified according to
2014/34/EU (ATEX)
High degree of option of parts ex stock
Established as an commercial standard, worldwide in use
Mining and Cement: heating technology
Oil and Gas: pumps, fans, compressors, air flow condensers
Power Generation: pumps, followers, compressors, air condensers, water turbines
Chemical compounds and Pharmaceuticals: driers, lauter tuns, pumps, fans, compressors, mixers, agitators, reactors
Plastic and Rubber: sole- and double-screw extruders
Pulp and Paper: wastewater purification plants
Water and Wastewater: aerators
Foodstuff and Beverage: lauter tuns, reactors, agitators, mixers
Did you know?
Original Ever-power elastomers ensure the perfect operation of your system. The flexible elements of the Ever-electrical power coupling are subject to compression. If the versatile elements are irreparably harmed, the hub parts touch metal. This “emergency operation capability” is required, e.g., in the case of fire pump drives.