In the category of reducers, planetary reducers are trusted in servo, stepping, DC and other transmission systems due to their small size, high transmission efficiency, wide deceleration range and high precision. Its role is to reduce the speed increase torque and decrease the load/motor moment of inertia ratio under the premise of ensuring precision transmission. Previously planetary gearcouple of years, some users possess suffered from unnecessary damage when the reducer is normally broken because of human elements such as for example illegal installation. Therefore, in order to better help the users to use the reducer, I’ll introduce you at length how to correctly install the planetary reducer.
Proper installation, use and maintenance of the reducer is an important component of ensuring the standard operation of mechanical equipment. As a result, when setting up the planetary reducer, be sure to properly assemble and use it in tight accordance with the next installation and use.
First step
Before installation, confirm if the motor and reducer are intact, and strictly check if the dimensions of the parts connected to the reducer are matched. Here are the dimensions and coordinating tolerances of the positioning boss, input shaft and reducer groove of the motor.
Second step
Unscrew the screw on the outer side of the flange of the reducer flange, modify the clamping band of the PCS program so that the medial side holes are aligned with the dust holes, and insert the hexagon socket into the hexagon. From then on, take away the motor shaft key.
third step
Connect the engine to the gearbox naturally. When connecting, it should be ensured that the result shaft of the reducer can be concentric with the insight shaft of the electric motor, and the outer flanges of the two are parallel. As the center is inconsistent, it will cause the motor shaft to break or the reducer equipment to wear.
In addition, it really is strictly forbidden to hit with a hammer or so on during installation to prevent harm to the bearing or gear due to excessive axial force or radial force. Make sure to tighten the mounting bolts before tightening the tightening bolts. Before installation, wipe the anti-rust essential oil of the motor insight shaft, positioning boss and reducer reference to gasoline or zinc-sodium drinking water. Its purpose is to guarantee the tightness of the bond and the flexibility of operation, and also to prevent unnecessary wear.
Before connecting the motor to the reducer, the motor shaft keyway should be Tractor Gear box perpendicular to the tightening bolt. To make sure uniform drive, first screw the mounting bolts at any diagonal placement, but usually do not tighten them. Then screw on the mounting bolts at the additional two diagonal positions and lastly tighten the four mounting bolts one by one. Finally, tighten the tightening bolts. All tightening bolts are to be set and inspected using the torque wrenches based on the indicated fixed torque data.
The correct installation between the reducer and the mechanical equipment is similar to the correct installation between your reducer and the get motor. The main element is to make sure that the result shaft of the reducer is definitely concentric with the shaft of the powered part.