The smallest chain complying to ANSI is 25 of 6.35 mm pitch. Nonetheless, in response towards the demands for smaller chains in recent years for large technology machinery such as workplace products, healthcare machines and industrial robots, we give 15 of four.7625 mm (3/16 inch) pitch as well as 15H1 being a high-power edition of 15. These substantial precision chains are manufactured below severe quality control specifically needed for smaller sizes, taking put on resistance also into consideration.
Variety of chain
Refer on the “Low-speed selection”. Having said that, the chain operation speed may be set substantially large based upon the kind of lubrication as proven while in the table under.
Connecting hyperlinks and offset backlinks
R connecting back links are used for compact pitch chains. Even so, given that their strength is reduce than that in the base chain, and since the clip is likely Small%20pitch%20chain%201to come off in high velocity operation, the use of connecting links just isn’t advised. Use a loop chain without having attaching connecting hyperlinks.
Offset back links are available for chains besides 15 and 15H1, but their use is just not advisable for your very same cause as stated for your R Connecting backlinks.
Working pace and sort of lubrication
15: A high precision mini-pitch bushing chain that may be smaller sized than a compact drive chain for standard applications, 25
25: Smallest bushing chain among ANSI normal chains using curl bushings.
35: A ANSI normal bushing chain suitable for little precision machines that demand large strength.