Vacuum pressure pump is a device that removes gas molecules from a sealed volume in order to leave behind a partial vacuum. The first vacuum pump was invented in 1650 by Otto von Guericke, and was preceded by the suction pump, which dates to antiquity.
Vacuum Pumps, pressure pumps, cover a wide range of operating pressures. Laboratory/filtration vacuum pumps are for use in the laboratory or anywhere a low vacuum is necessary; typically give both vacuum and pressure capabilities. Use rough vacuum pumps (or roughing pumps) for laboratory and industrial applications requiring an even of vacuum less than 10-3 Torr. Make use of high vacuum pressure pumps if you want vacuums greater than 10-3 Torr. Also, consider the free-air capacity needed (the higher the free air capacity, the faster it’ll evacuate the chamber) and whether you will need a lubricated (oiled) or non-lubricated (dried out or oilless) pump. Lubricated pumps provide higher capacities, higher vacuum levels, and lower noise, but can contaminate the system and require more maintenance.
Industrial Vacuum Pumps
Our selection of commercial vacuum pumps includes oil-less and oil-flooded options. We are able to customize a pump to fit your specific needs and provide you with guidance with regards to deciding on the best pump for you. You can expect high-quality, long-lasting outcomes when you choose Becker vacuum pumps.
100% Oil-less Vacuum Pumps
The Ever-power KVT3.60 – 3.140 series pumps are 100% oil-less rotary vane vacuum pumps designed to operate on a continuous basis at any point from atmospheric pressure to a vacuum degree of 27” HgV (75 torr). These direct travel units are supplied with a high efficiency TEFC, C-encounter, flange mounted electric electric motor. Each one of these pumps is equipped with an integral vacuum comfort valve, a 5μ inlet filtration system, and vibration isolators as regular equipment.