A gear drive drive requires two gears for procedure. Both gears are spur cut, and the drive equipment receives push from the power output. The drive gear then transfers capacity to the driven gear.
Different Drive Systems
All drive systems require a drive gear. The drive gear is the primary transfer from the power source to the driven gear. A belt from the drive equipment to the driven equipment is a “belt driven” system. Another option may be the “chain driven” program. The “chain driven” system runs on the chain from the drive gear to the driven equipment. The “gear drive” system is immediate gear-drive. The drive gear is directly meshed with the driven gear.
Common applications
Gear drives are found in transmissions, rear ends and transfer situations; at times the drive equipment will be smaller compared to 
the driven equipment. Different gear ratios allow the transmission to shift to lower or higher rpm speeds.
Automotive gear drive
Gear drives are applied to automotive engines. A “equipment drive” usually identifies the timing drive; it replaces the common timing-chain with spur-cut gears. A gear drive is well known for the “whining sound” it emits. The teeth of the gears mesh collectively as the gears convert with the rotation of the engine. This keeps the engine with time.