Select Page

China Professional Zdy Series Parallel Cylindrical Gearbox Speed Reducer supplier

Product Description

ZDY Series Parallel Cylindrical Gearbox Speed Reducer 

Company Information
     Established in 1979, HangZhou Gearbox Manufacturing Co., Ltd.  is located in National High-tech Development Zone of HangZhou, ZheJiang , China.  With more than 38 years’ experience in research and development of gear transmission products, the factory covers an area of 87,

 
FAQ
 Are you trading company or manufacturer ?
A: We are manufacturer.
Q: How long is your delivery time?
A: Generally it is within 10 days if the goods are in stock, for goods produced as per order, it is within 35 days after confirmation of order.
Q:How long should I wait for the feedback after I send the enquiry?
A: Normally Within 12 hours.
Q:What information should I give you to confirm the product?
A: Model/Size, Transmission Ratio, Speed, Shaft directions & Order quantity etc.
Q: Hong long is your product warranty?
A:We offer 12 months warranty from departure date of the goods.
Q: What is your payment terms?
 T/T 1
 
Website: jiangchi2012
 
 
  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application:Motor, Machinery, Agricultural Machinery
Function:Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction
Layout:Parallel
Hardness:Hardened Tooth Surface
Installation:Horizontal Type
Step:Single-Step
Customization:
Available

|

Customized Request

gearbox

Steps to Replace a Faulty Gearbox in an Automobile

Replacing a faulty gearbox in an automobile is a complex task that requires proper tools, skills, and safety precautions. Here are the general steps involved in the process:

  1. Prepare the Vehicle: Park the vehicle on a flat surface and engage the parking brake. Disconnect the battery to ensure safety during the procedure.
  2. Drain Fluids: Drain the transmission fluid from the old gearbox into a suitable container.
  3. Disconnect Components: Remove any components obstructing access to the gearbox, such as the driveshaft, exhaust system, and linkage.
  4. Suspend the Engine: If necessary, use an engine hoist or support to suspend the engine safely.
  5. Support the Gearbox: Use a transmission jack to support the weight of the gearbox.
  6. Remove Gearbox: Detach the gearbox from the engine by removing bolts and disconnecting the clutch or torque converter.
  7. Install New Gearbox: Position the new gearbox onto the engine and secure it in place with bolts.
  8. Reconnect Components: Reattach the driveshaft, exhaust system, and linkage that were disconnected earlier.
  9. Refill Fluids: Fill the new gearbox with the appropriate transmission fluid according to the manufacturer’s specifications.
  10. Lower Engine: Carefully lower the engine back into its original position if it was suspended.
  11. Test and Adjust: Start the vehicle and test the new gearbox for proper operation. Check for any leaks, unusual noises, or gear shifting issues.
  12. Final Check: Double-check all connections and ensure that all components are properly secured.
  13. Dispose of Old Fluid: Dispose of the old transmission fluid safely and responsibly.
  14. Dispose of Old Gearbox: Properly dispose of the old gearbox according to local regulations.

It’s important to note that gearbox replacement can vary significantly depending on the vehicle’s make and model. It’s recommended to consult the vehicle’s service manual or seek professional assistance if you’re not experienced in automotive repair.

China Professional Zdy Series Parallel Cylindrical Gearbox Speed Reducer supplier China Professional Zdy Series Parallel Cylindrical Gearbox Speed Reducer supplier
editor by CX 2024-05-14

Tags: china gearbox | gearbox | gearbox china | gearbox reducer | gearbox speed | gearbox speed reducer | reducer | reducer gearbox | reducer speed | speed gearbox | speed gearbox reducer | speed reducer | speed reducer gearbox | supplier gearbox

SSJ GROUP PTE. LTD.

MAIL: [email protected]

As one of the leading manufacturers, suppliers, and exporters of mechanical products, We offer reducers, sprockets, industrial and conveyor chains, belts, pulleys, gears, racks, gearboxes, motors, PTO Shafts, taper lock Bushing, and many other products. Please get in touch with us for details.

SSJ UK Limited
Sara Jones
Mail: [email protected]
TEL: + 44 7944 869861
ADDR.: Bury St Edmunds, Suffolk IP32 7LX, UK

SSJ ITALY S.R.L.
TEL: +39 0522 1606 388; +39 3471 65 17 22
ADDR.:Via Pasteur, Reggio Emilia, Italy