Outfitted using the zero leak bidirectional checking sole-noid valves, this energy unit is intended for your operation of two independent circuits. Which are respectively to the primary and subordinate platforms with the double scissors lift. Two cut-off valves are used for reducing the machine manually in case of energy loss. If far more independent circuits are needed to your application please get in touch with us for availability.
Remark: one. Please check with our product sales engineer for that various pump displacement, motor energy or tank capability.
two. CSA or UL licensed motors are available upon request.
one. The AC motor is of S3 duty cycle, which may only operate intermittently and repeatedly, i.e., 1minute on and 9 minutes off.
two. Clean all the hydraulic parts concerned just before installation of the energy unit.
3. Viscosity in the oil shoud be 15~46 cst,and the oil ought to be clean and free of charge of impurities,N46 hydraulic oil is encouraged.
4. The power unit need to be mounted vertically.
5. Check the oil level within the tank immediately after the preliminary working of your energy unit.
6. Oil shifting is required following the first a hundred operation hours,afterwards when every 3000 hours.